Piercing ring 1.2mm, Implant Grade Titanium Segment Ring in Rosegold

The piercing ring is made of high-quality G23 Titanium, which is also suitable for those with severe allergies and special sensitivities. The segment ring does not have a ball, but instead has a ring-shaped part with a hinge. The ring is easy and convenient to use.

This simple ring is suitable for almost all piercings where you use 1.2mm thick jewelry. It can be used for septum and lip piercings, as an eyebrow piercing, and of course for various ear piercings.

The gold color is made by coating the jewelry with PVD. This creates a coating that lasts significantly longer than other coatings! The method has been used in medical procedures since the 80s. The coating has been tested for years with good results. Definitely a coating worth trying for those with special sensitivities and allergies.

Size and material details:

• Size: 1.2mm / multiple diameters
• Material: G23 titanium
• Ti6AL 4V Eli degree 23 – ASTM (F-136)
• Color: rose gold
• Fastening: clicker or hinge mechanism

Instructions for use:

• Avoid getting cosmetics on your jewelry, as they will accumulate on the surface of the jewelry and tarnish it over time. If you wear jewelry with an ear piercing, it is recommended to remove it before dyeing your hair.
• Store in its own box or jewelry pouch when not wearing.
• The jewelry has a clicker - a hinged closure where the jewelry opens by lifting and snaps shut. It is worth guiding the opening part with your fingers or pliers to the right place, especially if you are using a larger diameter, this way the ring can be easily attached.
• If necessary, you can adjust the ring's fastening mechanism. If you gently squeeze the ring "tight" while the lock is open, you can adjust the fastening tighter. If you open the ring more, the lock will become looser. It is worth making adjustments very carefully so that you do not adjust the ring too much, even a small squeeze/unlock has a big effect on the ring's mechanism♥.
• If necessary, the decorative part can be cleaned with, for example, dishwashing liquid and a soft toothbrush. Put a drop of detergent on the jewelry, brush gently with a toothbrush and rinse. Washing removes cosmetic residues from the jewelry and it looks wonderfully shiny again!